cecotec TOAST&TASTE 2L Manual De Instrucciones página 48

ENGLISH
Note
You may notice a slight burning smell or smoke when using the toaster for the first time,
caused by the excess of lubricants from the manufacturing process. Ensure good ventilation
and let the toaster complete a few cycles until no odour or smoke can be noticed.
After a short cooling down period, your toaster will be ready for use. The operation instructions
are detailed below.
3. OPERATION
- Plug the toaster into a power supply and introduce the bread loaves in the
- product's slots.
- Turn the intensity level knob to the desired position.
- Lower the lever, the toaster will start operating and the Cancel button light will turn on.
- The toaster will eject the bread loaves and will turn automatically off when it has finished
toasting.
- Use the extra-lift system to remove the smallest bread pieces.
Reheat function
- Use this function to reheat cold toasts.
- Introduce the toasts in the toaster and lower the lever. Press the Reheat button to select
this function.
Defrost function
Introduce the toasts in the toaster and lower the lever. Press the Defrost button to select this
function.
Stop function
To stop the toasting process at any time, press STOP.
Crumb-collecting tray
- The tray is designed to collect the breadcrumbs at the bottom of the device during the
toasting process.
- Pull from the crumb-collecting tray to take it out. Empty it and then put it back in its
position.
Bun holder
When necessary, install the bun holder on top of the toaster's rack. Select the desired intensity
level and use the lever to start the toasting process.
TOAST&TASTE 2L
48