Technoline WS 9218 Manual De Instrucciones página 16

Main functions

DCF-77 radio-controlled time

12/24 hour time display

Calendar function: January 1, 2000 - December 31, 2099

Week display in seven languages (English, German, French, Italian,
Spanish, Dutch, Danish)

Alarm with 5-minute snooze function

Indoor temperature measuring range: 0℃ to +50℃

Outdoor temperature measuring range: -40℃ to + 70℃

Humidity measuring range: 20% to 95%

3 outdoor sensor channels

Transmission frequency: 434 MHz

Maximum transmission power: 10 dBm

Air pressure range: 800 to 1100 Hpa

Trend for Indoor / outdoor temperature and air pressure

Weather forecast function

Moon phase indication function

Low battery indicator

Daylight saving time (DST) function

Priority: Active Alarm > Sensor signal reception > Time signal reception

Function buttons: ZEIT, ALARM, SENDER, ▲, ▼, Zzz
Getting started:

Remove the battery compartment cover of the outdoor sensor and
insert 2 x AAA size battery while observing the correct polarity [ "+"
and "–" marks]. Close the cover of the battery compartment again.

Remove the battery compartment cover of the base station and insert
2 x AAA size battery while observing the correct polarity [ "+" and "–"
marks]. Close the cover of the battery compartment again.

Place the base station securely on a flat surface.

The remote sensor should be securely mounted onto a horizontal
surface.
Notes:

Make sure that the sensor is set to the same channel as displayed on
the station. Set the sensor channel by using the channel switch on the
back of the sensor (1, 2 or 3) and press the SENDER button on the
back of the station to set the channel of the station (1, 2 or 3)
EN3