Geba Tronic Cody Universal 3 Manual De Instrucciones página 15

Transponder
Program 1
Teach-in of transponder keys
Put the desired
Put DIP of the
key to the
desired relay or block
* (1/2/3) to ON
The transponder key is programmed to the desired block!
* Note:
Cody Universal 3
The keys are distributed among three blocks with each 255 keys of on color. The blocks
correspond to the first 3 DIP switches.
ATTENTION:
It is not possible to teach-in key different colors in one and the same block!
The reader should not be mounted directly on metal. Then use a spacer case (No. 508.000G.00).
LED flashes
(1x long)
Set all DIP to
reader OFF
Keypad
Program 2
Creating a new pass code
Factory setting = 1- 4
push
Enter 8 digit
mastercode
button
Enter 4 or 5
digit pass code
The new pass code is now saved!
The entered pass code is now stored in the selected memory slot !
You can enter up to 50 different pass on the memories 00-49!
Program 3
Deleting a pass code
sound signal
Enter 8 digit
push
2x long
mastercode
button
push push
button button
The selected memory slot of the pass code
is now deleted!
push
sound signal
2x long
button
push
sound signal
1x long
button
Enter 2 digit
push
memory slot,
e.g. 07 or 28
button
sound signal
1x long
Enter 2 digit
memory slot,
e.g. 07 or 28