Geba Tronic Cody Universal 3 Manual De Instrucciones página 16

Keypad
Program 4
Changing the control time / Tiptomatic time
Enter 8 digit
sound signal
push
mastercode 2x long
button
push
Enter 3 digit
time 001-255
button
The modified Tiptomatic time is saved!
This set time is the same for all relays (factory 60 sec.).
Program 5
Changing the control time - lock-out time
push
Enter 8 digit
mastercode
button
Enter 3 digit
time 001-255
*Lock out time:
dynamic = The lock-out time is extended by 10 sec. with
every wrong entry (max. 255 sec.)
static = The lock-out time is according the set time( 000 = turned off)
The modified lock-out time is saved!
push
button
sound signal
1x long
push
push
sound signal
2x long
button button
push
sound signal
= dynamic*
1x long
button
push
= static* sound signal
1x long
button
Keypad
Program 6
Entering a pass code
push
Enter 4 or 5 digit
pass code
button
A correct code is detected, the corresponding relay is switched!
Before the actual pass code, you can press any other keys to prevent fraud.
If an incorrect pass code is entered, you will hear a sound signal (3 beeps).
Entering a new pass code is only possible after the lock-out period (factory: 20 sec.) which end is
push
sound signal
1x long
button
push
button
push
STOP
button
push
button
signalled by a long sound signal.