Section 3 - Micro-Volume Settings; Accessing The Micro Volume Settings - Cole-Parmer JENWAY Genova Nano Manual De Instrucciones

SECTION 3 – MICRO-VOLUME SETTINGS
3.1

ACCESSING THE MICRO VOLUME SETTINGS

The Micro Volume icon is displayed in the bottom right hand corner of the screen in
each measurement mode.
Fig 3.1 – Accessing the Micro Volume Settings Menu
The micro volume settings are accessed by pressing the key below the Micro Volume icon.
The micro volume settings allow the user to select the required path length (0.2mm or 0.5mm)
for a measurement and to calibrate the accessory using a standard solution with known
absorbance values at 260 and 330nm.
Path Length
Calibration icon
Length Setting icon
12
Current Calibration
Factors icon
0.2mm Path
0.5mm Path
Length Setting icon
Fig 3.2 – Micro Volume Settings Menu
Micro Volume Icon
Tick icon
A
Standard Value icon
A
Standard Value icon
Calibration Standard
Path Length Value icon
Alignment Mode icon
Auto Path
Length Setting icon
Calibration
260
Calibration
330