Descargar Imprimir esta página

ABC Design Viper 4 Instrucciones De Uso página 13

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
15. Opening the carrycot
Extend and secure the side panels by pulling the two loops outwards until the bracket engages in the
mountings.
Make sure that the retainers are securely engaged.
16. Fitting the adapter to the carrycot
Fit the adapter onto the carrycot from below until it engages in the brackets provided.
Make sure that the adapter is securely engaged.
17. Inserting the mattress
Insert the mattress in the cover.
Lay the mattress on the base.
NB: The mattress is wedge-shaped. Make sure that the raised part is at the head end.
18. Adjusting the handle
To adjust the handle, press the buttons on both sides.
Now you can adjust the handle.
19. Fitting the apron
Fit the closed end of the apron over the lower end of the carrycot.
Extend the apron over the cot.
Secure the ends of the apron with the Velcro fastening provided on the outside of the hood.
20. Adjusting the sun canopy
a. Pull the sun canopy out from inside the hood.
b. Fold the bottom half of the sun canopy up to reduce the shading a little
21. Mounting the carrycot on the pushchair
a. The adapter is fitted to the long side of the carrycot.
Place the carrycot onto the pushchair so that the catch mechanism engages.
b. To remove the carrycot, press the buttons on the adapter on both sides of the cot and lift the cot up to
release it from the catches.
CAUTION: Always check before use that the carrycot is correctly secured
to the pushchair.
EN - 08

Publicidad

loading