Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25
- EN -
Cleaning the pump
How to proceed:
 E
Unscrew the transition piece.
Remove the two screws and open the filter housing.
Take out the pump.
Remove the screws of the pump casing and pull off the pump casing.
Pull out the impeller unit (magnetic resistance).
Clean all parts.
Reassembling the unit
How to proceed:
 F
Place the pump into the strainer casing.
Route the connection cable through the cable opening in the filter housing.
Replace the filter cover, turn in the two screws and hand tighten.
Screw on the transition piece together with the flat seal.
Disposal
Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided.
Disable the unit beforehand by cutting off the cables.
Storage/Over-wintering
Remove the unit at temperatures below zero degrees centigrade. Thoroughly clean and check the unit for damage.
Store the unit immersed in water or filled with water in a frost-free place. Do not flood the power plug!

Wear parts

The impeller unit is a wearing part and does not fall under the warranty.
14

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Aquarius 7500Aquarius 9500

Tabla de contenido