Pulsar THERMION XM30 Guia De Inicio Rapido página 7

LED Indicator * Battery charge status
Battery charge from 0 to 10%.
Charger not connected to the mains power supply.
Battery charge from 0 to 10%.
Charger connected to the mains power supply.
Battery defective.
Battery should not be used.
Battery charge from 10 to 20%.
Battery charge from 20 to 60%.
Battery charge from 60 to 95%.
Battery completely charged.
Can be disconnected from the charger.
* The LED indicator displays the current level of charge of the battery for
30 seconds when the APS charger is not plugged in. When the power is
connected, the display shows the current status of the battery constantly,
the LEDs additionally flickering to indicate the battery charging process.
Installing the removable battery
Turn the battery cover (7) counter clockwise and
•
remove.
Install the battery (8) into the battery compartment
•
along the special guides in the device casing designed
for it.
• When properly installed, the battery is locked into the
slot with a special clip.
Replace the battery compartment cover (7), turning it
•
clockwise.
7
Battery
slot cap
8
Battery
4
ENGLISH