Charging The Batteries - Pulsar THERMION XM30 Guia De Inicio Rapido

Charging the batteries

Thermion thermal imaging riflescopes come with a built-in rechargeable
lithium-ion Battery Pack APS3 with a capacity of 3200 mAh and a removable
rechargeable lithium-ion APS2 Battery Pack with a capacity of 2000 mAh. The
batteries should be charged before first use.
Open the microUSB cover (9) by
•
turning it counter clockwise.
• Attach the microUSB plug of the USB
cable (16) to the microUSB socket (10)
in the body of the riflescope.
• Attach the second plug of the USB
cable (16) to the USB port on the
mains adapter (17). Plug the device
into a 100–240 V power outlet (18).
WARNING. When charging batteries via
the microUSB connector (10) in the body
casing of the riflescope, the built-in APS3
Battery Pack is the first to be charged.
Once it is fully charged, the removeable
APS2 Battery Pack begins charging. When
the device is in use, power consumption
occurs in reverse order.
The rechargeable lithium-ion APS2
Battery Pack may be recharged using
the APS* charger.
• Fully insert the rechargeable APS2*
Battery Pack (8) supplied with your
device, or purchased separately, along
the guide rail into the APS charger slot
(13).
• Point A on the battery and Point B on the
charger should be aligned.
• Two batteries** can be charged at the
same time – a second slot is provided
for this.
• Attach the microUSB plug of the USB
cable (16) to the socket (14) of the battery
charger (13). Plug the adapter into a
100–240 V power outlet (18).
Attach the second plug of the USB cable (16)
•
to the USB port on the mains adapter (17).
The LED indicator (15) will display the
•
battery charge status (see Table).
* Included in the delivery package. The use
of a rechargeable APS3 Battery Pack is
possible.
** Available separately.
3
ENGLISH
17
Charger
USB cable
16
10
А
8
А
B
15
LED Indicator
18 17
Power Charger
outlet
18
Power
outlet
Micro-USB
connector
9
Micro-USB
slot cap
Battery
Charging
13
base
B
Micro-USB
port
14
16
USB
cable