Sanyo DP42746 Manual De Instrucciones página 17

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles


Recall Key—Select the first channel you want to
watch; then select another channel using the
NUMBER keys. Press RECALL to switch easily
between the channels.
NOTE: The RECALL key cannot toggle between a Digital
channel and an Analog channel. See TUNER (#6)
key description.

Menu key—Press this key to display the on-screen
menu.
Tuner Key—Use this key to toggle from one tuning
system to another, digital channels and analog
channels.
NOTE: The TUNER key is inactive when an external input
is selected (Video 1, Video 2, Video 3, or HDMI).
Caption Key—Press to select analog or digital cap-
tioning. The Analog Caption modes are: CC1 ~ CC4,
Quikcap, and OFF . The Digital Caption modes are:
Digital CC1 ~ CC6, Quikcap, and OFF .
Channel Scanning ( ( CH L M ) Keys—Press L (up)
M (down) keys to tune to the next higher or lower
channel in the Channel Scan Memory list. The scan-
ning loop includes analog channels, digital channels,
and all AV inputs.
Pix Shape Key—Use this key to change the video
display format. Available options depend on signal
received and the broadcast's aspect ratio. They may
include: PIX1 , PIX2 , PIX3 , and PIX4 . See simulated TV
images below:
PIX1
Gray colored borders
appear at the sides, of
the screen.
Note:
4:3
image
without distortion on a
16:9 screen.
PIX3
Enlarges a Pix2 image
vertically (some of the
image may be cropped
off).
PIX2
A 16:9 image fills the
screen normally. A 4:3
images is stretched hor-
izontally and may ap-
pear distorted.
PIX4
Stretches
the
Pix3
image horizontally (por-
tions
of
the
sides
and/or top and bottom
may be cropped off).
Need help?
Audio Key—Press to select the desired audio mode
(if available): DIGITAL: Main, Sub1, Sub2, Sub3, etc.;
ANALOG: Stereo, Mono, SAP .
11
Power Key—Press to turn DTV on or off.
12
Sleep Key—Press this key, then press the "0" key to
set the Sleep Timer. The desired time can be set from
30 minutes up to 3 hours in 30 minutes increments.
Sleep Timer will switch off the DTV automatically.
Sleep Timer cancels when the DTV is turned off or if a power
failure occurs.
13
Mute Key—Press once to minimize the volume. Press
again to restore.
This key will not mute sound from the
.
audio out jacks
14
Enter Key—Press this key to select an option from
the menu system, when required.
Cursor L (up) M (down) keys—Press these keys to
.
15
move the cursor up and down within the menu.
< <
> >
Cursor
(left)
(right) keys—Press these keys to
move the cursor left and right within the menu.
16
Exit Key—Press this key to exit from the menu
system.
17
Volume (VOL – +) Keys—Press the – + keys to adjust
volume. The screen displays a left or right red arrow
that blinks as many times as you press the Vol – +
keys.
Reset Key—Press twice to restore factory settings.
18
The DTV will automatically start Channel Search and
clear all customized settings.
NOTE: The Reset Function includes a channel search.
Current Digital and Analog channel databases will
be deleted and new ones created by the Channel
Search process. To receive Digital Cable channels,
see page 19 for Digital Cable Search.
These features will reset to factory defaults:
Picture/Sound Adjustments: Color, Tint,
Contrast, Brightness, Sharpness, and Tone
Channel Memory—Digital /Analog channel
databases will be replaced
Analog Audio to Stereo
Captioning to OFF
V-Guide to OFF
Menu Language to English
Sleep Timer to OFF (if previously set)
Any Video mode to TV mode
If desired, personal settings can be made again
using the menu options.
www.sanyoctv.com
Visit our Web site at
The
17
1-800-877-5032
or Call

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido