FIRST-THINGS-FIRST (Required Initial Setup)
This Plasma television will reproduce a crystal clear Digital picture and exceptional sound.
The signal makes the difference!
1
INITIAL SIGNAL CONNECTIONS
Digital (DTV) RF Antenna Connection
•
Connect an RF Antenna to the Digital Antenna In
terminal.
The digital tuner in this DTV receives HD signals from an
antenna. Digital signals from a Set-top Box (STB) are
received through the Component In jacks.
This DTV can receive ANY resolution being broadcast
(HDTV, EDTV, or SDTV). However, ALL resolutions are
converted to 1080i for display.
Analog RF Antenna Connection
•
Connect a Cable signal (with or without a cable box),
Satellite Receiver, or RF antenna to the Analog RF
input.
PLASMA
DTV BACK
VCR BACK
ANALOG CABLE
CATV FRANCHISE NOTE: Cable companies, like public
utilities, are franchised by local government authori-
ties. To receive cable programs, even with equipment
which is capable of receiving cable channels, the con-
sumer must subscribe to the cable company's service.
I
DTV will select the correct Antenna mode for the type of
Analog RF signal connected automatically.
I
Use " Analog Antenna Signal" in the Setup menu to change
the Antenna Mode.
OR
ANALOG SATELLITE RECEIVER
Notes: If you do not have a VCR, connect signal directly to the TV 75
Need help?
DIGITAL ANTENNA INPUT
PLASMA TV BACK
The analog tuner in this Plasma DTV receives Analog
Antenna signals, Analog Cable signals, or the RF output
from a Satellite Receiver, VCR, or cable box.
PLASMA
DTV BACK
OR
VCR BACK
ohm terminal (UHF/VHF/CATV).
Don't be fooled by the phrase "Available in High-
Definition." The only resolution available with any of these
analog connections, regardless of the original content, is
standard analog (SDTV).
I
If you move the DTV to a new location, press the RESET
key twice after connecting the signal and turning on the
DTV.
www.sanyoctv.com
Visit our Web site at
DIGITAL RF
ANTENNA
PLASMA
DTV BACK
VCR BACK
ANALOG RF
ANTENNA
(Continued on next page.)
1-800-877-5032
or Call
7