User's Manual
E N
3. Suggestion
Turn off power switch after each riding
Turn off power switch when not using
In order to avoid battery damage that could not charge when using
product first time .
Tires should be inflated with right air pressure and battery should be
charged at least 12 hours .
Simple installation steps
1.Frame connection
Connect rear part of frame and main frame .
Tight screws on the rear and main frame .
2.Front fork connection
At the end of the frame put thick black rubber pads, one of the pits
second from the top. Between the rubber pads to put a metal tube
(guide screws) to the rubber pads make bearings.
The whole screw to the steering wheel with a long screw.
3.Seat installation
Place seat on the frame.
Confirm 4 holes on the seat consistent to holes on the frame .
Turn using the screws and nuts extended.
Notice before use
Charging
Battery of new product is not charged fully please charge battery
before using .
First charging time :12hours
Second charging time :3-5hours
A fully charged battery is indicated on the charger lights change from
red to green.
7