Starmix ISC CLDC ISC Batrix L 36-18V Instrucciones Para El Manejo página 32

5.8 Switching off the vacuum cleaner
▶ Set the operating mode/speed control dial to the >OFF<
position.
↳ The vacuum cleaner is switched off.
▶ Remove the battery/batteries when the device is switched off.
▶ Fix the suction hose to the rear wall of the container by inserting
it into the accessories depot*.
▶ Remove the power tool.
6 Transit
▶ Remove the suction hose.
▶ Seal the suction port with a cap.
▶ Place the top part on the container.
▶ Close the closures on the sides.
▶ Remove the battery/batteries
▶ Place accessories in suitable plastic bags and seal the plastic
bags.
▶ Plug the hose ends together so that no dirt particles escape.
▶ Wrap the hose around the vacuum cleaner and clamp it to the
handle.
Fig. 14: Winding up the suction hose, step 1
32 - en
Fig. 15: Winding up the suction hose, step 2
Fig. 16: Tool box
l CAUTION!
Risk of tipping during transport
▶ Transport no more than one tool box on the vacuum cleaner.
If the vacuum cleaner is subjected to impact, the batteries may
be damaged.
▶ If possible, remove batteries before transport.
▶ After transport with batteries inserted: check the batteries for
damage (e.g. broken plastic parts).
NOTE
* depending on equipment variant