TRAPP 48L22AH0x8A Manual De Instrucciones página 130

10. Connect front link (E). Work on the left
side of the tractor. Insert one end of the
link assembly bar into the front suspension
support (F) hole and secure it with a retainer
spring (G), using link hole located behind the
support.
11. Insert the other end of the bar (E) into front
support hole (H) and secure it with a washer
and a retainer spring (J).
12. Disconnect belt tensioner bar (K) from its
support (L).
13. Install belt on engine clutch pulley (M).
Important:
Check for proper position of belt on mower
pulleys.
130
14. Place belt tensioner bar (K) back on the
support (L).
Caution!
The belt tensioner bar behaves like a spring.
Hold it tight, and couple it slowly.
15. Raise attachment lift lever to highest position.
16. If necessary, adjust reference wheels before
operating the mower as indicated in the
Operation section of this manual.
www.trapp.com.br