Before The First Use - Linea Domo DO536FR Manual Del Usuario

BEFORE THE FIRST USE

· Remove all packaging materials and any promotional stickers.
· Clean the frying pan and basket with warm water, some washing-up liquid and a non-abrasive sponge.
· Wipe the inside and outside of the fryer clean with a soft cloth.
· Caution: you may not add any frying oil or fat in the frying pan.
USE
1. Place the appliance on a flat, stable and heat-resistant surface. Make sure that there is at least 10 cm
of free space around the appliance.
2. Make sure that the frying basket is placed inside the frying pan. The basket should click into place.
Do not put any oil or fat into the frying pan.
3. Slide the frying pan with the empty basket inside the fryer.
Caution: Never use the frying pan without the basket inside.
4. Make sure the timer button is set to 0. Plug the power cord into a socket.
5. Turn the temperature knob to set the desired temperature.
6. Turn on the unit by turning the timer knob clockwise. Turn the knob all the way to the maximum and
then turn it back to the desired timer time (certainly more than 3 minutes to preheat). The red power
indicator light will turn on and the unit will now start preheating. Wait until the green temperature
light lights up to indicate that the desired temperature has been reached.
7. Pull the frying pan out of the appliance. The fryer will automatically stop working. Place the
ingredients into the basket. Do not overfill the basket, so that the the ingredients can not touch
the heating elements. Place the frying pan with the filled basket back into the fryer. The fryer will
automatically start working again (if the set time had not been passed yet).
8. Set the desired time with the timer button. Attention: you can also fill the frying basket at the
beginning and place the filled basket in the deep-frying pan and in the deep fryer, in-stead of waiting
for the appliance to preheat. In this case, add 3 minutes to the normal fry-ing time.
9. During deep-frying, the temperature indicator light will switch on and off alternately. This indicates
that the deep fryer ensures that the set temperature is maintained.
10. When the set time is up, a bel signal will sound. The deep fryer switches off automatically. You
can also manually set the timer button to 0, if your ingredients are ready before the set time has
elapsed. This will turn off the fryer.
11. Remove the deep fryer from the appliance and place it on a heat-resistant holder. Move the safety
latch forward and press the release button. Remove the basket with the ingredients. Caution: Don't
press the release button while holding the frying pan, for example to shake the ingredients.
12. Remove the food from the basket.
COMMENTS
· You can adjust the set temperature or time at any time while the unit is in operation.
· Excess oil is collected in the deep fryer.
· If your food is not ready after the set time has elapsed, you can always switch the appliance back on
for a few minutes.
IMPORTANT FRYING TIPS
· It is recommended to shake the fries every 5 minutes, so that they are baked evenly. This also applies
to other, smaller snacks that cover eachother when they are inserted in the basket.
www.domo-elektro.be
27
DO536FR