Zoeller APak Instrucciones De Instalación página 7

4. Once the APak's Z Control
next to the location you want to use for the APak (see Figure K). Follow the directions to add your APak by either auto-detect or entering
the Device I.D. When successful, a APak product tile will appear in your account.
Firmware Updates:
The APak is capable of OTA, or "over the air" firmware updates. It's possible that the APak could perform an update immediately if one is available
at the Z Control Cloud. If an update is taking place, the Z Control
®
LED will be solid and all other LEDs will turn off while the update is being installed. After up to 1 minute, the APak will restart and return to normal
operation. The APak's alert history on the Z Control
accounts will occur.
Figure K
Congratulations! Your APak is online. Be sure you have added the contact information for phone numbers and email adresses that should receive
notifications. This can done by selecting "Manage Contacts" from the main menu (the square with 3 lines in the upper right corner). You can also
edit how each device sends out notifications from the device's "Alarm Settings" tab. You can now open the product's configuration by clicking the
"View" button to modify the APak's device and notification settings. You can also install the Z Control
and iOS versions available, search "Z Control" in the app stores).
LED is solid, log in to your account (or create one) at zcontrolcloud.com. Choose the Add New Device button
®
LED will flicker for up to 1 minute while the update is downloaded. The Z Control
®
Cloud will also be updated with the firmware upgrade information, and nofication to email
®
© Copyright 2021 Zoeller
mobile app on your mobile device (Android
®
Co. All rights reserved.
®
7
Select Add New Device
When you add the correct
Device ID, an APak product tile
will appear in your account
®