Where Do I Start; Installing - Whirlpool 260 Guía De Referencia Rápida

Where do I Start?

INSTALLING

Before turning on:
•
Clean your product inside with
a soft cloth or sponge,
lukewarm water and mild soap.
•
Check whether the power
supply voltage at the
installation place is the same
indicated on the tag attached,
next to the power supply cord
plug of your Freezer.
The Freezer shall be connected
to a good wall outlet.
•
Never connect your Freezer to
double or triple extension cords
together with another
appliance in the same wall
outlet. It may overload power
supply, impairing the operation
of your Freezer, and resulting in
fire accidents. Use an exclusive
wall outlet only.
•
If you live in an area where there
are voltage oscillations greater
than 10% of the rated voltage,
do not plug your Freezer directly
into the wall socket.
•
Install an automatic voltage
stabilizer with a power output of
at least 1000W.
•
Be sure that the voltage stabilizer
can withstand the oscillations in
your area.
•
If your appliance does not have a
plug with a ground pin, connect
the ground wire of the Freezer
(the green wire attached to the
back of the appliance) to a
proper ground.
•
Grounding is necessary in any
voltage (127 or 220V), and for
any electric-electronic appliance.
The grounding wire shall not be
connected to the neutral
conductor of the power system,
nor to cable tubing, gas or water
pipes, taps or faucets.
When grounding, follow the
grounding standards in force and
call an authorized electrician.
•
If the power supply cord is
damaged, it shall be replaced by
the assistance shop (or dealer) in
order to avoid the risk of
accidents.
Place:
The Freezer shall neither be
installed next to heat sources
(stoves, heaters etc.) nor in a place
that receives direct sun rays.
The installation in an inadequate
place impairs the operation of your
Freezer and increases power
consumption.
16