Whirlpool 260 Guía De Referencia Rápida página 22

Door Preparation
•
Remove the left-hand screw and
stop bushing from the left lower
parts of the door.
Install the right-hand stop
bushing - that comes inside the
Freezer - on the right lower part
of the door, using the same
screw.
•
Remove the bushing from the
upper hinge on the left-hand
side and the plug on the right-
hand side inverting their
position.
Assembly of the Door to the
Cabinet
•
Replace the door to the cabinet
fitting the lower stop bushing
onto de lower hinge pin.
•
Replace the upper hinge, now on
the right-hand side, fixing the
hinge pin onto the door upper
bushing.
•
Align the door before tightening
the upper hinge screws.
•
Replace the control panel
complement onto the cabinet,
pressing it until you obtain a
perfect fitting to the control
panel.
19