Network Settings; Load Settings File - Nikon WT-2 Manual De Referencia

Network Settings

Adjust settings for connection to a wireless network
or ftp server ( 26–35, or see page 42 for sample ftp
settings). These settings can also be made with the
help of the Connection Wizard (
ing a settings fi le that has been saved to the camera
memory card with a computer (
camera monitor from turning off while adjusting settings, set the Monitor
off Custom Setting to 10 m or use an optional EH-6 AC adapter to power
the camera.
Choose Settings
Camera network settings are saved in one of four
banks. Any changes to settings using the menus or
Connection Wizard will be saved in the current bank,
and are recalled when this bank is selected again.
Option
A–D Select bank.
Rename Rename selected bank.

Load Settings File

Load a network settings fi le that has been saved to
the camera memory card using a computer.
Option
No
(default) Exit without changing settings.
Load Wireless, TCP/IP, and FTP settings from
Yes
memory card.
Creating a Settings File
An application for creating settings fi les is available from the websites listed on page 1
of this manual. After creating a settings fi le, save it to the root directory of the memory
card using a CompactFlash card reader or PCMCIA memory card adapter. No more
than one settings fi le should be stored on the memory card at a time. Additional infor-
mation is available from the download site.
6, 14) or by load-
25). To prevent the
Description
Description
25