Pairing Options (Ptp / Ip Mode Only) - Nikon WT-2 Manual De Referencia

Pairing Options (PTP / IP Mode Only)

This menu offers the following pairing options (for more information on pair-
ing, see page 17):
Camera
The name under which the camera is registered when
paired with a computer. The default name is "WT2_"
followed by the MAC address of the WT-2. To use
a different name, highlight the current name in the
pairing options menu, press the multi selector to the
right, and edit the name as described on page 26.
The maximum length is thirty-nine characters.
Edit Connection List
Selecting this option displays the computers with
which the camera is paired. To enable or disable a
pairing with a selected computer or delete computers
from the list, highlight the computer name and press
the multi selector to the right. The menu shown at
right will be displayed.
Option
Enable Enable pairing with selected computer.
Disable Disable pairing with selected computer.
Select Yes to delete selected computer from connection list. Camera
can not be used with computer in PTP / IP mode until camera has been
Delete
removed from list of installed network cameras in Wireless Connecting
Utility (
36
19) and pairing performed again.
Description