Sunny SF-RW5606 Manual Del Usuario página 9

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
STEP 5:
Connect the Extended Wire (No. 36) to
the Sensor Wire (No. 35) and put the
wires into the Slide Rail (No. 45). Then
attach the Slide Rail (No. 45) to the
Main Frame (No. 1) with Bolt (No. 34),
2 Flat Washers (No. 37), and Nut (No.
38) using Allen Wrench (No. 59) and
Wrench (No. 60).
Insert Knob (No. 33) and Flat Washer
(No. 15) and turn to tighten.
Check that the Adjustable Foot Pad
(No. 40) does not touch the floor. If it is
touching the floor, then the Adjustable
Foot Pad (No. 40) has not been
tightened. Try lifting the Slide Rail (No.
45) slightly and tighten the Adjustable
Foot Pad (No. 40).
STEP 6:
The Meter (No. 12) uses 2 AA batteries
(A) (included).
Push the tab at the bottom of Meter
(No. 12) up slightly and remove the
Meter (No. 12) from Main Frame (No.
1). Install 2 batteries (A) in the battery
compartment in the back of the Meter
(No. 12). Put the Meter (No. 12) back
into the Main Frame (No. 1). You will
hear a click when the Meter (No. 12) is
back in place.
The assembly is now complete!
8