No change in measurements with drain
shown. (K-7167-AF or K-7167M-AF)
Recommended faucet area.
2-1/4"
(5.7 cm)
Product Information
Applicable products:
Pump on left
Pump on right
Fixture*:
Bathing well, basin area
Bathing well, top area
Weight
To overflow
Water depth
Capacity
* Approximate measurements for comparison only.
Included component:
Cut-out template
Pump
Heater
1.5 kW
Required accessories:
Grip rails (pair)
1023242-1-C
4" (10.2 cm)
Max
1" (2.5 cm) Max
3" (7.6 cm) x 24" (61 cm)
Flat Faucet Deck
Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H Min
42" (106.7 cm)
1-1/2" OD
K-1375-LM
K-1375-RM
40" (101.6 cm) x 27" (68.6 cm)
61" (154.9 cm) x 32" (81.3 cm)
155 lbs (73 kg)
16" (40.6 cm)
90 gal (341 L)
113311-7
V
Hz
A
220-240
50/60 Hz
15
K-9653
Note: Pump/Piping Protrudes
Beyond Rim.
6-1/2"
(16.5 cm)
36"
(91.4 cm)
72" (182.9 cm)
3" (7.6 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control
Installation Notes
NOTE: Pump protrusion beyond rim.
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 44
lbs/square foot (216.5 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
If installing a rim-mount faucet, make sure there is no interference
with drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
2
13-1/2"
(34.3 cm)
3-1/2" (8.9 cm)
22" (55.9 cm)
2-7/8" (7.3 cm)
208-240 V, 20 A, 50/60 Hz
Kohler Co.