Tabla de contenido
Publicidad
Charging The Product
1.
Placing and charging: The charging seat is placed against the
wall and is to beplaced on a flat ground. Do not place articles
within the range of 0.5m left and right and 1.5m ahead.
2.
Power Supply: Connect the power adapter to the DC plug.
3.
Installing side brush: Install the side brush according to the
left and right (L/R).
FIG 3
FIG 2
8
4. Charging: Place the Robot on the charging seat to
charge (during charging, the indicator light flashes and once
complete the light is constant. The charging time is about
5 hours.)
During the cleaning process, the host can sense that its power
is insufficient and automatically start the recharging mode, it
automatically find the charging dock to charge. You can also
command the device to start the recharging mode by tapping on
back charging key
of the remote controller.
Charging attention:
The charging seat cannot be used in environments with
1.
strong reflection such as direct sunlight and nearby mirrors.
If there is any object with strong reflection, please cover it 7
cm from the bottom.
2.
In order to ensure the normal working hours of the host
computer, please fully charge it before use. The charging
time is about 5 hours.
3.
When charging, do not start the water tank assembly,
so as to ensure the safety of charging and prevent
wet rags from damaging the floor.
FIG 4
Publicidad
Tabla de contenido
