Cleaning The Product - V-TAC VT-5555 Manual De Instrucciones

Cleaning The Product

According to different cleaning needs, this product has a variety
of cleaning mode to choose from. You can start various cleaning
mode through Robot, remote control or V-TAC Smart Light App.
Auto Cleaning:
Applicable scenario: The most commonly used cleaning method is
that the main engine uses a bow-shaped path to plan and clean the
whole house according to the actual home environment.
Setting method: In the shutdown state, press the key for longtime,
when the indicator light of the host is on, it indicates that the Robot is
powered on. When the key is pressed for a short time, or press the
automatic cleaning bottom
starts automatic cleaning.
For the Robot to start super sunction mode, Press the
time again.
) on the remote control, the Robot
one more
FIG 5
Single Room Cleaning:
Applicable scenario: Cleaning single room
Setting method:Click the remote control mode switch button
select the single room cleaning mode to start the single room cleaning.
Warm Tip: When it is only necessary to clean a single room, please
close the door and the host will do centralized cleaning in the room
If this room does not have a charging seat, the device will return
to the original point.
Single room cleaning mode is always the super sunction cleaning mode.
Edge Cleaning:
Applicable scenario: For indoor corner cleaning, the Robot cleans
along the perimeter of fixed objects ( such as walls), and returns to
the charging seat after the edge cleaning is finished.
Setting method:Click the remote control mode switch button
select the Edge cleaning mode to start the edge cleaning.
Manual Control:
Applicable scenario: Suitable for manual control cleaning.
Setting method:Click on the button of the remote controller
to control the machine to move forward and backward and turn.
9
to
to