Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Sound power level (L
Measured ...... 92.9 dB (A); K
Guaranteed .............................95 dB (A)
Vibration (a
) ............. 3.6 m/s
n
The noise and vibration values were es-
tablished by the standards and stipulations
listed in the Conformity Declaration.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, including,
for example, times during which the
power tool is turned off and times
when the tool is turned on but is run-
ning idle).
Safety precautions
This section covers the basic
safety instructions when working
with this implement.
Symbols used in the manual
Warning symbols with in-
formation on damage and
injury prevention.
)
WA
= 1.88 dB
WA
; K= 1.8 m/s
2
Instruction symbols with
information on preventing
damage.
2
Pull out the mains plug.
Wear gloves when handling
the roller.
Help symbols with informa-
tion on improving tool han-
dling.
Symbols on the implement
Caution!
These Instructions must
be read.
Danger of injury due to
flung-out material! Keep
bystanders well away from
the implement.
Danger of electric shock
if the power cable is dam-
aged! Always ensure that
the power cable is kept
well away from the imple-
ment and its cutting tools.
Wear eye and ear
protection.
Caution! - Sharp tools. En-
sure that the hands and feet
are kept well away from the
cutting tools. The cutting
cylinder continues to rotate
briefly after the motor has
been switched off.
GB
25
Publicidad
Capítulos
Tabla de contenido
