Start Up; Stop - SCANMASKIN World Serie Manual

Item Text
1 Left/Right
2 Hour Meter
3 Speed
4 Water Off/On
5 EMERGENCY STOP
6 Start/Stop
7 Main key switch
8 Joystick
9 DSP System
Table 41
Description of the control panels.
4.4

Start up

See "4.1Precautions" before starting the machine.
How to start the machine
 Make sure that the machine has the optimal Scanmaskin approved grinding tools for the
surface.
 Make sure that the power plug and hoses for dust collector (if used) are connected to the
machine.
 Turn on the dust collector if used.
 Make sure that the "EMERGENCY STOP" button (5) is in its upper position. If not, release
it by turning it clock wise until it rises and press the "STOP" (6) red button once to reset.
 Adjust the motor speed (3) to the lower first half.
 For RC models please see the chapter ??? before starting.
 Make sure to have a firm grip on the handle.
 Press "START" (6) the green button.
 Adjust the speed (3) to get desirable cut.
4.5

Stop

How to stop the machine
 Press the "STOP" (6) button.
 Wait for the machine to come to a complete stop before letting go of the handle.
 Turn off the dust collector if used.
88
Description
Selects rotation direction
grinding motor
Total running hours
Changing the grinding
motor speed
Engage the water flow
Emergency Stop
Starts and Stops the grind-
ing motor
Main key switch
Manual Joystick for wheel
system
HMI, Human, Machine In-
terface
Partnumber
596001+596022+596020
570028
596008 + 596009
596001+596022+596020
596003+596022+ (2)596021
596006+596022+596020+596021
572064
572012
www.scanmaskin.com