STACK-ON PC-1702-RFID Manual De Instrucciones página 5

SELECTING A LOCATION
The case is to be mounted to a permanent shelf.
For optimal safety and security, the case should
be installed in an isolated, dry and secure area.
THE CASE SHOULD ALWAYS BE KEPT OUT
OF THE REACH OF CHILDREN.
SECURING THE CASE WITH HARDWARE
NOTE: This case must be mounted to a permanent
shelf. Failure to do so will compromise the safety
and security of the case.
Secure case using screws and washers as
shown below.
SECURING THE CASE WITH THE CABLE
For optimal performance while on the go, the
case should be installed in an isolated, dry and
secure area.
THE CASE SHOULD ALWAYS BE KEPT OUT
OF THE REACH OF CHILDREN.
NOTE: This case can be secured with a cable
that is attached to a fixed object.
Failure to to do so will compromise the safety
and security of the case.
To secure the case to a fixed object, loop the
cable around the object and place the cable's
small end into the notch on the side of the case.
Tip the cable end down while inserting in the
notch. Locking the case will secure the cable
end inside the case.
5
16
40720-1704