Publicidad
Idiomas disponibles
Idiomas disponibles
Lay the BACK in position, with small offset over TOP,
and large offset over SHELF (See Detail K). Holes should
line up!! Fasten back with (8) BLACK SCREWS.
Note the Double-faced Tape on the ends of the SIDES.
Turn Over shelf upright, and place on Desk. CAUTION- THE DOUBLE-FACED TAPE
IS STRONG!! USE CARE IN POSITIONING THE OVERSHELF! If you wish, you can
leave the backer on the tape, and use it as a pad, instead. Note that the Over shelf will not
be as stable if used this way.
See Detail M. The four WIRE GUIDES (2 in each SIDE) that cover the Wire Troughs are
removable. Remove the "half-moon" in the WIRE GUIDE to allow the electrical cord to
fit into the trough. Cover with the WIRE GUIDE.
DETAIL M
SCALE 1: 4
PARTS LIST
QTY DESCRIPTION
(2)
SIDE (NON HANDED)
(1)
BACK PANEL
(1)
SHELF
BLACK SCREW
(8 required)
Double Faced Tape
Wire trough - covered
by Wire Guide
PART #
MG772881
48"-MG772877
60"-MG772878
72"-MG772879
48"-MG772882
60"-MG772883
72"-MG772884
Double Faced Tape
Remove "Half-moon" to allow
wire through trough.
Wire
QTY DESCRIPTION
(1)
TOP
(1)
WIRE GUIDE
(Already assembled to Legs)
HARDWARE BAG:
(24)
BLACK SCREW (#10-24 X 1/2) F09542
SHORT FLANGE IS
TOWARD TOP!!
LONG FLANGE
IS TOWARD
SHELF!!
DETAIL K
SCALE 1: 6
PART #
48"-MG772893
60"-MG772894
72"-MG772895
MG772850
Publicidad
