Cleaning; Storage - LEVITAS PIUMA UP Serie Manual De Instrucciones

8. Turn the knob clockwise, putting the narrow's knob in proximity of "+" symbol.
In this way the compressor will inflate the mattress more quickly.
9. Connect the compressor plug to the 220V outlet.
10. Switch on the compressor with the "ON/OFF" switch and wait about 25 minutes, so that the com-
pressor inflate the mattress completely.
illustrative purposes only
NOTE: every time the mattress is set up for use, it is recommended that the pressure first to be set
to the max. The user/career can then adjust air mattress weight levels to the desired softness after set
up has been completed

14. CLEANING

It is important to follow the cleaning procedures before using the equipment on human bodies; otherwise,
patients and/or doctors may have the possibility of getting infection.
CAUTION: Do not immerse or soak pump unit.
Wipe the pump unit with a damp cloth and a mild detergent. If other detergent is used, choose one
that will have no chemical effects on the surface of the plastic case of the pump unit.
Wipe down the mattress with warm water containing a mild detergent. The cover may also be
cleaned by using sodium hypochlorite diluted in water. All parts should be air dried thoroughly
before use.
CAUTION: Do not use phenolic based product for cleaning.
CAUTION: After cleaning, dry the mattress without direct exposure sunlight.
WARNING!
Unplug the pump before starting the cleaning procedure

15. STORAGE

• Fold the mattress accurately to prevent creases
• Roll from the head end towards the foot end with the valve open
For single cells mattress:
1. Lay the bubble pad or mattress on a flat surface and upside down
2. Roll-up the mattress from the head end towards the foot end
3. Foot-end strap can then be stretched around the rolled pad/ mattress to prevent unrolling
CAUTION: Do not fold, crease or stack the mattresses.
Electrical cord
220V plug
illustrative purposes only
9