Technical Notes; General Description; General Use - Bell & Ross WW1-92 Manual De Instrucciones

WW1-92
Te c h n i c a l N o t e s
By creating the Vintage WW1 (Wrist Watch 1), Bell & Ross pays tribute to the first wristwatches worn by pilots in the 1920s, a design born from the need to
keep their hands free. Drawing its inspiration from a point of evolution midway between the pocket watch and the wristwatches of the 1940s, the WW1 brings
together the design elements of the Roaring Twenties: a large fob-watch type diameter, wire lugs welded to the sides of the watch giving the impression of
horns, and a thin leather strap, elegant yet strong.

general DeSCrIPTIOn

: Self-winding mechanical movement. 21 jewels. 28,800 vibrations per
Movement
hour. Power reserve of approximately 40 hours. High-precision setting in 4 positions
(tolerance of 0/+10 seconds per day).
Hour setting with seconds stopped.
Crystal : domed anti-reflective sapphire.

general USe

. With the watch off (crown in position 0), wind the mechanism by turning
Winding
the crown clockwise. After approximately 40 turns, the watch is fully wound (the
mechanism has no stopper in order to keep the winder from being wound too
tightly). This provides a power reserve of 40 hours. When the watch is being worn ,
the clockwork winds the movement.
2. The second hand is then stopped, which allows you to set the time down to the
second. Set the time by turning the crown in the desired direction.
A
B
C
The Bell & rOSS InTernaTIOnal gUaranTee
Your Bell & Ross watch has successfully passed the most rigorous reliability tests in the Swiss watch-making industry. It is guaranteed against all manufacturing defects for 2 years from the date of purchase entered by the Bell & Ross
approved retailer on the international guarantee certificate subject to applicable laws and/or legal guarantees. This guarantee is total (parts and labor). It excludes however:
. Damage that is the result of accidents or improper or incorrect use of the watch (violent shock, crushing, brutal handling of the clasp).
. Damage that is the result of repairs or dismantling not carried out by an approved Bell & Ross retailer or an approved after-sales service center.
. The results of normal use and wear of the watch and strap. This also excludes batteries given the specific nature of these items.
IMPORTANT : To be covered by the Bell & Ross International Guarantee, any work must be carried out by approved specialists : retailers approved by Bell & Ross, approved after-sales service centers.
This guarantee can only be applied on presentation of the Bell & Ross International Guarantee certificate, duly completed, dated and signed by an approved retailer.
Models and Technical features subject to change
Functions : hours, minutes, small seconds.
Case : 45 mm diameter. 11.4 mm thickness.
Water resistance : 50 meters.
. Pull the crown out to position
Time setting
0 1 2
IMPOrTanT
Once the time has been set, push the crown back to position 0 to ensure your watch
is fully water-resistant. The crown must never be adjusted under water.
Care
After being immersed in salt water, the watch and strap should be carefully rinsed
with fresh water. The water-resistance of the watch should be checked every two
years. In order to guarantee the brand's high service standards, any work on your
watch must be carried out by the Bell & Ross repair center or a Bell & Ross appro-
ved watchmaker. For any repairs under warranty, you must present the Bell & Ross
warranty card, dated and signed by the retailer at the time of purchase.
A. Minute hand
B. Hour hand
C. Second hand
D D. Crown
0. Wind the mechanism manually (clockwise)
1. Neutral position or intermediate notch
2. Set the time (turning clockwise or counter-clockwise)