Publicidad
Idiomas disponibles
Idiomas disponibles
R FR FRL VERSIONS
AVENTICS 651/652/653 SERIES
IN CONFORMITY WITH ATEX DIRECTIVE
Products requiring approval are those that have their own potential ignition risk. These product categories include
moving parts. They are labelled with the CE marking and the explosion protection hexagon; operating instructions
and the EC declaration of conformity are provided.
These conditioning units of compressed air are envisaged for use in explosive atmospheres in the form of gas,
steam, mists and dust.
The classification into zones 1-21 of these units is defined by the following marking:
II 2G Ex h IIC T* Gb X
II 2D Ex h IIIC T*°C Db X.
(* see table below for temperature classification according to the ambient temperature range)
Compliance with essential health and safety requirements is guaranteed by conformity to European Standard EN
ISO 80079-36 and EN ISO 80079-37.
This specific ATEX documentation is supplied as an addition to the general user instructions where de-
tailed product information is provided.
______________________________________________________________________________________________
!
SPECIAL CONDITIONS FOR SAFE "X" USAGE :
Ambient temperature range and temperature classification
PRODUCTS:
- REGULATOR
- MANIFOLD REGULATOR (ONLY 651 & 652)
- AIR PILOT OPERATED REGULATOR (ONLY 652)
STANDARD
Low Temperature
High Temperature
FPM/FKM
Low/High Temperature
High Temperature + FPM/FKM
- FILTER/REGULATOR
STANDARD
Low Temperature
High Temperature
FPM/FKM
Low/High Temperature
High Temperature + FPM/FKM
- COALESCING FILTER/REGULATOR
STANDARD
High Temperature
FPM/FKM
High Temperature + FPM/FKM
Visit our website at www.emerson.com/aventics
P1 max.
ambient
(bar)
temperature range
(°C)
651/652
653
-20 to +50
-40 to +50
-20 to +80
16
20
-20 to +50
-40 to +80
-20 to +80
P1 max.
ambient
(bar)
bowl
temperature
range (°C)
651/652
653
plastic
16
12
-20 to +50
metal
16
20
plastic
16
12
-40 to +50
metal
16
20
metal
-20 to +80
16
20
plastic
16
12
-20 to +50
metal
16
20
-40 to +80
16
20
metal
metal
-20 to +80
16
20
P1 max.
ambient
(bar)
bowl
temperature
range (°C)
651/652
653
plastic
16
12
+1,7 to +50
metal
16
20
metal
+1,7 to +80
16
20
plastic
16
12
+1,7 to +50
metal
16
20
metal
+1,7 to +80
16
20
4
q
Risk from electrostatic charges:
For the IIC Group, prevent electrostatic charging of external insulating surfaces by using the appropriate installa-
tion and cleaning measures. To clean external insulating surfaces use a damp cloth.
Connect the conditioning units to the earth.
When combined with other conditioning units, ensure that all metallic and conductive parts are always intercon-
nected and linked to the earth to avoid significant electrostatic charges being created.
The earth is connected to the unit or to the combination of conditioning units by the downstream and upstream
use of metal pipes connected to the earth. If the pipes are non-conductive, earth connection should be performed
by the assembly and/or fixing devices adapted to the ATEX products.
_____________________________________________________________________________________________
Installation, commissioning and servicing and maintenance
These operations may only be carried out by authorised personnel and in accordance with the usage instructions.
Only carry out maintenance in zones where there is no explosive atmosphere.
If during maintenance it is established that wearing and spare parts need exchanging, contact an ASCO Numatics or
AVENTICS reseller.
Any modification of the product with parts not supplied by the manufacturer will invalidate the certification.
Assembly of conditioning units
The assembly comprises components which are individually certified. Therefore assembly comprised in this way
does not generate any additional risk. Each component has a marking which is bespoke to that component and
the assembly category corresponds to the most unfavourable category of one of the components of the
T
T°C
assembly.
Product fitted with a metal tank: FR and FRL (see fig. A)
When replacing a filter element saturated by the FR (filter/regulator), proceed as described below:
T6
85
• Loosen the screw (1)
• Remove the tank (2) from the body (3)
T5
100
• Remove the filter element and replace with a new one
• Replace the tank (2)
T6
85
• Tighten the screw (1) in the body (3) up to the contact of the tank and screw one quarter to a half turn extra
T5
100
in order to ensure ground continuity.
T5
100
For adding oil to the lubricator tank, proceed in the same manner as above.
EN
T
T°C
T6
85
T6
85
T5
100
T6
85
T5
100
T5
100
T
T°C
T6
85
T5
100
T6
85
T5
100
R FR FRL VERSIONS
AVENTICS 651/652/653 SERIES
IN CONFORMITY WITH ATEX DIRECTIVE
5
Visit our website at www.emerson.com/aventics
q
EN
Publicidad
