Publicidad
Idiomas disponibles
Idiomas disponibles
®
孚 IRC LE
VACUUM PUMP AND BRAKE BLEEDING KIT
^
[
3
• Always read completely the instruction manual before working.
• Never use the tool in the areas that it is not designed for.
两
• Always wear eye protection that meets OSHA and ANSI Z87.1 standards.
＠
• Always wear hand gloves when working with the tool.
• Ensure the work area has adequate lighting.
．
• Keep children and unauthorized persons away from the work area.
• Keep work area clean and tidy and free from unrelated materials.
• DO NOT allow untrained persons to use the kit.
VACUUM TEST (Intake manifold)
1) Start the engine and run to normal operating temperature. Run the engine at idle
2) Connect the vacuum pump to the intake manifold with a connection hose (other tubes and adapters may be required)
3) Connect the vacuum pump to the connection hose. (as in Fig. 1)
4) The gauge should be read according to the range it points (e.g. -17 to -22 inHg) and the way it moves (steadily moving
towards the value as specified in auto ma
NOTE: Higher or lower vacuum or any abnormal movement is an indication of problems in the intake manifold, head gasket,
carburetor or valves.
BRAKE BLEEDING
1) Connect a hose to the vacuum pump and to the fluid transfer I id.
2) Connect another hose to the fluid transfer lid and to the brake bleed screw (as in Fig. 2).
3) Operate the pump to draw brake fluid out until the fluid becomes bubble-free.
NOTE DO NOT discharge waste brake fluid to the environment. Recycle the waste fluid to a waste authority
facturing service ma
al).
叩
叩
www.9circleint.com
Publicidad
