Norlake CAPSULE PAK Manual De Instalación página 10

R C P ™ R S
EMOTE APSULE AK EFRIGERATION YSTEMS
CAPSULE PAK™ REMOTE SYSTEMS WITH ELECTRIC VAPORIZER
Set the Capsule Pak™ evaporator section over the hole
in the ceiling section. Align the tabs on the side of the
insulated evaporator section with the predrilled holes in
the ceiling section. Before proceeding to the next step,
the evaporator cover should be removed. Look inside
the evaporator section and be sure the air divider in the
ceiling section lines up with the black gasket divider in the
evaporator section. Some adjustment may be required by
simply bending the ceiling section divider slightly forward or
backward. This will prevent any short cycling of discharge
and return air.
Fasten the evaporator section down to the ceiling using the
provided drive screws, which can be found taped to the side
of the insulated evaporator section.
CAUTION! This must be done to prevent the entire
refrigeration system from moving during operation.
© 2008 Nor-Lake 4/08 PN 121430
8