Set Baud Rate; Configuration Web Interface - Fronius Smart Meter 240V-3 UL Manual De Instrucciones

DIP Switch
Position

Set Baud Rate

Select the baud rate by setting DIP switch position 8 (see below). The change will take ef-
fect immediately.
Baud Rate
9600 (default)
Configuration
1
Web Interface
2
3
4
0, Down - Terminating resistor = OFF
1, Up - Terminating resistor = ON
DIP Switch 8
0, Down
Go to the web interface of the Fronius Datamanager in Settings - Meter - Settings
Select "Fronius Smart Meter"
Click "Settings"
Set Location of the meter, CT-Ratio and Grid Type
7
17