GPO Attaché Guia Del Usuario página 7

Turntable Mode
1. Connect the small DC jack into the DC-IN port on the rear
of the unit.
2. Connect the plug to a mains outlet and turn the power
socket on.
3. Turn on the unit using the Power/Volume Control.
4. Use the mode select button until the LED indicator shows
that you have selected turntable mode:
5. Place your chosen vinyl record onto the turntable.
6. Set the correct speed (RPM) of your record using the RPM
Speed Control.
7. Move the tone arm to the desired starting point on the
record. The turntable will now start to play.
8. Auto-stop on, the turntable will start spinning when the arm
is moved towards the record, when the last track is finished
the turntable will stop spinning.
9. Adjust the volume to your preferred volume.
10. Auto-stop off, the turntable will start spinning as soon
the record play function is selected, when the last track
is finished the turntable will continue to spin until the unit
is switched off or until a different mode is selected, this
function is only required for certain 45 rpm records that are
pressed more towards the centre of the record.
GPO_Attaché_EU_Manual_July_2017.indd 7
7
23/07/2017 23:35