smartheart 01-542 Guia De Inicio Rapido

Automatic Digital
Wrist Blood Pressure Monitor
Model # 01-542
THIS QUICK START GUIDE IS INTENDED
AS A SUPPLEMENT TO THE INSTRUCTION
MANUAL. PLEASE READ THE COMPLETE
MANUAL PRIOR TO FIRST USE.
Before applying your blood pressure cuff, be sure your
wrist is within the appropriate range:
wrist circumference 5-1/2" – 8-1/4" (13.5 – 21.5 cm).
A 15 minute resting period is needed to stabilize the
body prior to taking a reading. No eating, drinking or
smoking while resting.
Applying the Wrist Cuff
1. Be seated at a table or desk with
your feet flat on the floor. Hold
your left arm in front of you with
your palm facing upward.
2. Apply the preformed cuff to your
left wrist so that the digital display
face is positioned on the inside
area of your wrist facing you.
3. Adjust the cuff 1/4" - 1/2"
from the edge of the head of the
ulna bone. The cuff should fit
comfortably, yet snugly around
your wrist.
IF YOU HAVE ANY QUESTIONS OR ARE EXPERIENCING
DIFFICULTIES, PLEASE CALL THE TOLL-FREE CUSTOMER SERVICE HELP LINE FOR FURTHER
Taking the Measurement
Select the desired user, 1 or 2, before
measurement. The user icon displayed represents
the memory bank where the measurement result will be
stored. When the monitor is OFF, press and release the
MEM/SET button to toggle between user 1 or 2.
1. Rest your elbow on a solid
surface with your palm
facing upward. Elevate your
arm so that the cuff is at the
same level as your heart,
Fig 1. Be certain that cuff is
elevated to the proper level;
you may choose to support your
hand with a folded towel or book.
Relax your left hand.
2. Press the POWER button to turn the
unit on.
3. The display will show the User1 or
User 2 icon. Press MEM/SET to
toggle between and select the desired
user to store the measurement in
memory.
4. Press the POWER button to confirm
and proceed with the measurement.
The unit will briefly run a self test,
Fig 2.
You will see the numbers increase on
the screen and the heart icon flashing
during measurement as the cuff
inflates.
5. When the measurement is
complete, your blood pressure measurement and
pulse reading results will show on the display screen
at the same time, Fig 3.
6. Consult the included Instruction Manual for
information on interpreting your reading results.
7. The reading will automatically be stored in memory,
up to 60 readings.
ASSISTANCE AT 1-866-326-1313.
8. Select POWER to turn the unit off and conserve
energy and battery life. The unit will automatically
shut-off after one minute.
Please Note:
• You can stop the inflation or deflation process of the
cuff at any time by pressing the POWER button.
• Many factors such as genetics, age, sex, altitude,
physical activity, anxiety, muscular development,
certain medications or even the time of day can
influence blood pressure.
• Blood pressure varies from moment to moment; even
Fig. 1
readings taken after proper rest periods can vary.
Home blood pressure readings may vary as much as
10-20 points from ones taken at your doctor's office.
• Variations in your individual readings should only be
interpreted by your physician or trained health care
professional.
• We encourage you to consult with your physician
to achieve the maximum benefit from your blood
pressure monitor.
Fig. 2
Fig. 3
#93-2143 07/18
©2018 Veridian Healthcare