ASROCK B75M-DGS Manual De Instrucciones página 10

frequency of accessing your SSDs or HDDs in order to extend their lifes-
pan.
14. ASRock Crashless BIOS allows users to update their BIOS without fear
of failing. If power loss occurs during the BIOS update process, ASRock
Crashless BIOS will automatically fi nish the BIOS update procedure after
regaining power. Please note that BIOS fi les need to be placed in the
root directory of your USB disk. Only USB2.0 ports support this feature.
15. Administrators are able to establish an internet curfew or restrict internet
access at specifi ed times via OMG. You may schedule the starting and
ending hours of internet access granted to other users. In order to pre-
vent users from bypassing OMG, guest accounts without permission to
modify the system time are required.
16. Internet Flash searches for available UEFI fi rmware updates from our
servers. In other words, the system can auto-detect the latest UEFI from
our servers and fl ash them without entering Windows OS. Please note
that you must be running on a DHCP confi gured computer in order to en-
able this function.
17. Users may prevent motherboard damages due to dampness by enabling
"Dehumidifi er Function". When enabling Dehumidifi er Function, the com-
puter will power on automatically to dehumidify the system after entering
S4/S5 state.
18. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the moth-
erboard functions properly and unplug the power cord, then plug it back
again. To improve heat dissipation, remember to spray thermal grease
between the CPU and the heatsink when you install the PC system.
19. Combo Cooler Option (C.C.O.) provides the fl exible option to adopt three
different CPU cooler types, Socket LGA 775, LGA 1155 and LGA 1156.
Please be noticed that not all the 775 and 1156 CPU Fan can be used.
20. ASRock XFast RAM is not supported by Microsoft
64-bit. Intel
supported by Microsoft
64-bit.
21. EuP stands for Energy Using Product, was a provision regulated by the
European Union to define the power consumption for the completed
system. According to EuP, the total AC power of the completed system
should be under 1.00W in off mode condition. To meet EuP standards,
an EuP ready motherboard and an EuP ready power supply are required.
According to Intel's suggestion, the EuP ready power supply must meet
the standard of 5v, and the standby power effi ciency should be higher
than 50% under 100 mA current consumption. For EuP ready power sup-
ply selection, we recommend you to check with the power supply manu-
facturer for more details.
10
®
Smart Connect Technology and Intel
® ® TM
Windows Vista
ASRock B75M-DGS Motherboard
® ®
Windows XP / XP
®
USB 3.0 ports are not
TM
/ Vista 64-bit / XP / XP