ASROCK Z77 Extreme11 Manual De Instrucciones página 46

Step 3. Align and insert the ASRock SLI_Bridge_3S Card to the gold-
fingers on each graphics card. Make sure the ASRock SLI_
Bridge_3S Card is firmly in place.
ASRock SLI_Bridge_3S Card
Step 4. Connect a VGA cable or a DVI cable to the monitor connector or
the DVI connector of the graphics card that is inserted to PCIE1
slot.
2.15.2 Installing Three SLI
Step 1. Each graphics card should have two goldfingers for the 3-Way SLI
Bridge connector. Insert one graphics card into PCIE1 slot, an-
other graphics card to PCIE3 slot, and the other graphics card to
PCIE5 slot. Make sure that the cards are properly seated on the
slots.
Two Goldfingers
46
TM
-Ready Graphics Cards
ASRock Z77 Extreme11 Motherboard