ASROCK Z77 Extreme11 Manual De Instrucciones página 53

2.16.3 Installing Four CrossFireX
Step 1. Insert one graphics card into PCIE1 slot, another graphics card
into PCIE3 slot, the third graphics card into PCIE5 slot and the
last graphics card into PCIE7 slot. Make sure that the cards are
properly seated on the slots.
Step 2. Use one CrossFire
PCIE1 and PCIE3 slots, another CrossFire
the graphics cards on PCIE3 and PCIE5 slots, and use the third
TM
CrossFire
PCIE7 slots. (The CrossFire
ics card you purchase, not bundled with this motherboard. Please
refer to your graphics card vendor for details.)
CrossFire
Step 3. Connect a VGA cable or a DVI cable to the monitor connector or
the DVI connector of the graphics card that is inserted to PCIE1
slot.
TM
TM
Bridge to connect the graphics cards on
Bridge to connect the graphics cards on PCIE5 and
TM
TM
Bridge
ASRock Z77 Extreme11 Motherboard
-Ready Graphics Cards
TM
Bridge to connect
Bridge is provided with the graph-
53