SICK WTL16 Instrucciones De Operación página 14

8020347.14CS | SICK
Subject to change without notice
1...3 sec.
Figure 7: WTS16 sensing range setting
2 Turn the potentiometer a fraction counterclockwise until the yellow LED indicator no
longer lights up. The sensing range is now located a fraction above the conveyor belt.
Figure 8: WTS16 sensing range setting
3 The conveyor belt should now be put into operation without any objects. If the yellow
LED indicator does not light up during the test run, the sensing range is set correctly.
Figure 9: WTS16 sensing range setting
4 If the object is in the path of the beam and the yellow LED indicator lights up, the
sensing range is set correctly.
7
COMMISSIONING
13