CHANGE DOOR PANELS
Note: The pre-installed glass door panels can be switched out with the included wood door panel (Q).
1. Remove the silicone trim along the outer edges of the glass panel on the inside of the door.
Start at a corner and pull to remove the four pieces. Be careful not to damage the silicone trim as it
will be used to secure the new panel.
2. Remove the glass panel from the door frame, then insert the included wood door panel (Q).
3. Using your finger press the silicone trim back into place. Move around the outer edge of the panel
until all four sides are secure.
1
2
1
4
(OPTIONAL)
2
3
Q
10
3
2
1
3
4