Electrical Connection - Siemens SIMOTICS GP Manual De Instrucciones

never be used as an anchoring point to lift the motor; otherwise the motor or
such equipment can suffer severe damage.

Electrical Connection.

7
DANGER
1.- The installation, operation and maintenance of the motor shall be
carried out by qualified personnel, who must be familiar with codes,
guidelines and applicable local regulations. Personnel must use the
adequate tools and be experienced in installation, operation and
maintenance of electric motors.
2.- Before any handling, make sure you have your personal safety
equipment such as shoes, gloves, girdle and lenses because if these
preventive measures are not taken, physical damage may occur.
3.- Verify that electrical supply matches with motor specifications as printed
on the motor nameplate. Make connections for each lead as indicated in
the connections diagram on nameplate. Failure to comply these
instructions could result in severe damage to the motor, surrounding
equipment or personnel injury.
4. - To facilitate the electrical connection, the conduit box can be rotated in
90° degrees increments. Avoid having the wire output towards drive end.
5.- Check that the machine really is in a no-voltage condition.
6.- Establish a safe protective conductor connection before starting any
work.
7.- Verify that the power lines are COMPLETELY DISCONNECTED when
making connections to the motor
.
8.- Before starting up, check that the electrical connections are in
accordance with the instructions on the wiring diagram located on the
motor nameplate.
Explosion-protected motors are equipped with terminal boxes with
type of protection to explosion proof or flame.
Please note in this regard design, connection options and spare parts.
Have authorized Siemens workshops perform any repairs.
Unrestricted 72 A5E43486667A_AB