tibelec EM666B1 Manual De Uso página 11

1. Set the function switch to position
rating; if unknown, start with the highest rating and work your way down.
2. Connect the test plungers to the circuit.
3. Read the value indicated by the needle
once it has stabilised.
1. Set the function switch to position
rating; if unknown, start with the highest rating and work your way down.
2. Connect the test plungers to the circuit.
Red plunger on +, black plunger on -.
3. Read the value indicated by the needle
once it has stabilised.
1. Set the function switch to position
rating; if unknown, start with the highest rating and work your way down.
2. Connect the test plungers to the circuit. Red plunger on +, black plunger on -.
3. Read the value indicated by the needle once it has stabilised.
1. Set the function switch to position
the battery to be tested.
2. Connect the test plungers to the battery terminals. Red plunger on +, black
plunger on -.
3. Read the BAD (bad, red zone) or GOOD (good, green zone) indication shown
by the needle once it has stabilised. The batteries indicated as BAD (red) are
discharged and must be replaced.
1. Set the function switch to
2. Before starting the measurement, position the needle on 0 at the right end
of the upper scale with the potentiometer and bring the 2 plungers into contact.
3. Connect the test plungers to the resistance.
4. To obtain a correct resistance value, and
if you have set the switch to x10, multiply
the value indicated by the needle
by 10 once it has stabilised.
V~
and the appropriate AC voltage
V
and the appropriate DC voltage
mA
Rating
adjustment following scale
30
600
BAT
and 1.5V or 9V rating depending on
Ω
and one of the 2 ratings.
Rating Read the
adjustment following scale
60
120
300 0-300
Rating Read the
adjustment following scale
12
60 0-60
120 0-12
300 0-300
and the appropriate DC voltage
Read the
0-300
0-60
Rating Read the
adjustment following scale
x10
0-1kΩ
x1k
Multiply
by
0-60 1
0-12 10
1
Multiply
by
0-12 1
1
10
1
Multiply Divide
by by
- 10
10 -
Multiply
by
10
1000
11