Tabla de contenido
Publicidad
AUTOMATIC WINDING MECHANISM (WITH HAND WINDING
MECHANISM)
(1) This is an automatic winding mechanical watch (with a
hand winding mechanism).
(2) The mainspring is wound by natural movements of your
arm when wearing the watch on your wrist.
In addition, you can also wind the mainspring by turning
the crown.
(3) If your watch stops, either swing the watch back and forth
ten or more times or turn the crown to wind the mainspring
in order to restart the second hand.
After it starts moving, set the calendar and time.
(4) When winding the mainspring, slowly turn the crown to the right (clockwise)
while in its normal position.
Turning the crown to the left (counter-clockwise) merely turns the crown
uselessly and does not wind the mainspring.
You can wind the mainspring fully by turning the crown to the right about
twenty times from a stopped position.
The crown can still be turned after the mainspring is fully wound. Either
use the above count or use the markings on the power reserve indicator
when winding the watch.
(5) This watch will run approximately 40 hours after it is fully wound. If it is
not wound enough, the watch may lose accuracy. In order to maintain the
watch's accuracy, we recommend wearing the watch at least 8 hours a
day.
CAUTION: Use caution
In order to use the watch and maintain precision, we recommend that you hold
the watch securely as shown above. Wind the spring by moving your arm left
and right in a large arc, until the power reserve hand is at the middle of the
power range (or higher), then put it on your wrist.
26
Publicidad
Tabla de contenido
