Battery Replacement - Tripp-Lite SmartPro SMART750XLA El Manual Del Propietario

Ocultar thumbs Ver también para SmartPro SMART750XLA:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Battery Replacement

Battery Replacement Door: Under normal conditions, the original battery in your UPS will last
several years. Battery replacement should be performed only by qualified service personnel.
Refer to "Battery Warnings" in the Safety section. Should your UPS require battery replacement,
visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific
replacement battery for your UPS.
1
2
3
UPS and Battery Recycling
14-12-047-932773.indb 8
1
Carefully pull the front panel away from the UPS.
Place front panel on top of the unit. Remove the battery support bar.
2
Remove old batteries.
Carefully pull the batteries from the UPS and disconnect them.
3
Connect new batteries.
Connect the new batteries in exactly the same manner as the old
ones: positive (red) connectors together and negative (black)
connectors together. Carefully push batteries back into the UPS.
4
Reassemble UPS.
Reinstall the battery support bar and replace the front panel.
Please recycle Tripp Lite Products. The batteries used in Tripp Lite products
are sealed Lead-Acid batteries. These batteries are highly recyclable. Please
refer to your local codes for disposal requirements.
You can call Tripp Lite for recycling info at 1-773-869-1234.
You can go the Tripp Lite Website for up-to-date information on recycling the
batteries or any Tripp Lite product. Please follow this link:
http://www.tripplite.com/support/recycling-program/
8
12/17/2014 4:31:40 PM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Agsm6955

Tabla de contenido