Din Radio Provision With Pocket; Iso Radio Provision With Pocket - Metra 99-7325 Instrucciones De Instalación

DIN radio provision with pocket

1. Snap the Double DIN brackets to
the outside edge of the Double DIN
trim plate. (Figure A)
2. Slide the Double DIN radio into the
bracket/trim plate assembly and
secure the radio to the assembly
using the screws supplied with the
radio. (Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-7325
(Figure A)
(Figure B)

ISO radio provision with pocket

1. Snap the Double DIN brackets to
the outside edge of the Double DIN
trim plate. (Figura A)
2. Slide the stacked ISO units into the
bracket/trim plate assembly and
secure the units to the assembly
using the screws supplied with the
units. (Figura B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. Reassemble dash in reverse order
of disassembly.
3
(Figure A)
(Figure B) Right side clip