Virutex EB140PLC Premilling Manual De Instrucciones página 27

E
(Figure 3.3)
(Figure 3.4)
(Figure 3.5)
F
In its forward movement, the panel stops
pressing, and releases, the lever A (Fig.
3.3) of the first microswitch, which au-
A
tomatically starts a timed sequence to
command the cutter change movement.
E
In a space of approximately 30 mm before the end of the
board, the reciprocating movement takes place that removes
the first cutter E (Fig. 3.5) and places the second cutter F (Fig.
3.5) in the working position. This, in a clockwise direction, will
mill the final section of the panel, guaranteeing the continui-
ty of the line of work and the adherence of the edge to the
previously edgebanded opposite side.
E
EB140PLC Premilling / Annex operating instructions - 27