CD Player
Playing a disc
1
Open the shutter.
2
Insert the disc labelled side up.
Playback starts automatically.
3
Close the shutter.
If a disc is already inserted, press (SOURCE)
repeatedly until "CD" appears to start playback.
To
Press
(OFF)
Stop playback
(SEEK) (–/+)
Skip tracks
– Automatic
(./>)
Music Sensor
[once for each track]
(SEEK) (–/+)
Fast-forward/
reverse
(m/M)
– Manual Search
[hold to desired point]
(1)(ALBUM–) or
Skip albums*
(2)(ALBUM+)
– Albums selection
* Available only when an MP3 file is played.
To skip tracks continuously, press (SEEK) (+) or
(SEEK) (–), then press again within 2 seconds
and hold.
To eject the disc
1
Open the shutter.
2
Push down the shutter.
The disc is ejected.
Notes
• While ejecting or inserting a disc, do not close the
shutter. The disc may be caught and damaged.
• A disc may be ejected if you open the shutter
forcefully.
• Before playing a track, this unit reads all track and
album information on the disc. Depending on the
track structure, it may take more than a minute
before playback begins. During this time, "READ" is
displayed. Please wait for play to start automatically
when the reading is complete.
• Depending on the condition of the disc, it may not
play back (page 6, 7).
• While the first/last track on the disc is playing, if
(SEEK) (–) or (SEEK) (+) is pressed, playback skips
to the last/first track of the disc.
• When the last track on the disc is over, playback
restarts from the first track of the disc.
• If you play a high-bit rate MP3 file such as 320 kbps,
sound may be intermittent.
Tip
A disc can be played with the shutter opened or
closed.
11