Identification Label; Safety Signs; Main Components - GGP ITALY Cruiser 430 Li 80 Serie Manual De Instrucciones

– using the cutting means on surfaces other than grass;
– using of the machine for leaf or debris collection;
– using the machine to trim hedges, or for
cutting vegetation other than grass;
– use of the machine by more than one person;
IMPORTANT Improper use of the machine will
invalidate the warranty, relieve the Manufacturer from
all liability, and the user will consequently be liable for
all and any damage or injury to himself or others.
3.1.3 User types
This machine is intended for use by consumers,
i.e. non-professional operators. The machine
is intended for "DIY" use only.
IMPORTANT The machine must
be used by one operator.
3.2

SAFETY SIGNS

The machine has various symbols on it (fig. 2). They are
used to remind the operator of the behaviour to follow
to use it with the necessary attention and caution.
Meaning of symbols:
Warning: Read the instructions be-
fore operating the machine.
Danger! Risk of thrown objects:
Keep all persons away from the work
area whilst working.
Only for lawnmowers with petrol
engines.
Only for electric lawnmowers pow-
ered by mains supply.
Only for electric lawnmowers pow-
ered by mains supply.
Danger of cutting yourself. Cutting
means in motion. Do not put hands
or feet near or under the opening of
the cutting means.
Be careful when using the sharp
cutting means: Do not put hands or
feet near or under the opening of the
cutting means. The cutting means
continues to turn even after the motor
has been switched off. Remove the
safety key (deactivation device) be-
fore carrying out any maintenance.
IMPORTANT Any damaged or illegible decals
must be replaced. Order replacement decals
from an authorised assistance centre.
3.3

IDENTIFICATION LABEL

The identification label holds the following data (fig. 1).
1. Sound power level
2. CE conformity marking
3. Year of manufacture
4. Machine model
5. Type of machine
6. Serial number
7. Name and address of Manufacturer
Article code
8.
9. Max. motor operation speed
10. Weight in kg
11. Power voltage and frequency
12. Electrical protection rating
13. Nominal power
Write the identification data of the machine in the specific
space on the label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an authorised service workshop.
IMPORTANT The example of the Declaration of
Conformity is provided on the last pages of the manual.
3.4

MAIN COMPONENTS

The machine is composed of a series of main
components that have the following functions (fig.1):
A. Chassis: this is the casing that houses
the rotating cutting means.
B. Motor: the driving force for the cutting
means and wheel drive (if provided);
C. Cutting means: the element
designed to cut the grass.
D. Rear discharge guard: it is a safety device
which prevents objects drawn up by the blade
from being hurled away from the machine.
E. Side discharge guard (if provided): it is a safety
device which prevents objects drawn up by the
blade from being hurled away from the machine.
F. Side discharge chute (if provided):
discharging the grass cuttings onto the ground at
the side, this is also a safety element that stops
any objects drawn up by the cutting devices
from being hurled away from the machine.
G. Grass catcher: as well as collecting the grass
cuttings, this is also a safety element that stops
any objects drawn up by the cutting means
from being hurled away from the machine.
H. Handle: this is the operator's work station.
It is long enough to ensure the operator
remains at a safe distance from the rotating
cutting means whilst working.
I. Battery: provides the energy for starting the
motor. Its specifications and regulations for
use are described in a specific manual.
EN - 4
as well as