Optional Functions - Vertilux VTi CELTIC RF Manual De Programación

Optional functions

•
Setting intermediate limits
•
Erasing an intermediate limit
• Readjusting the lower or an intermediate limit
• Adding an additional remote or "cloning" a channel
Pairing the motor with the remote control
Method 1:
1. Press and hold the
head of the motor until the
2. Select the desired channel and press the
up button until the motor "jogs". Now the motor
is paired with the remote control.
Method 2:
This method is convenient when it is difficult to access the button on the head of the motor.
1. Select the desired channel, press and hold the
up button for 3 s. Then power on the power
supply of the motor. The motor will "jog"once.
2. Release the up button
the motor "jogs". Now the motor is paired with
the remote control.
programming button on the
motor "jogs".
and press it again until
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
•
Changing to tilt or jog mode
•
Deleting a single motor or channel
• Deleting all channels
• Resetting the motor to factory default
PROGRAMMING
BUTTON
UP
BUTTON
BUTTON
vertilux.com
BUTTON
UP
ON
UP
3